Used Parts for Forklift - Unavoidably, lift truck components would eventually wear out and need replacing. The alternative of purchasing brand new parts can become costly so another idea is to acquire used components. This could save a lot of money eventually. It is a good idea to acquire used lift truck parts that have been remanufactured. These components will ensure that you are getting components which will work for a long time and be productive.
Worn or broken parts which are reproduced are a less expensive answer as opposed to rebuilding. With rebuilding components, only the components which are worn out or broken get changed, which means that other wearable parts might break down soon after acquisition.
Remanufactured components are cleaned after being taken apart and have the unusable parts changed. This method can provide the best assurance for used components. All wearable components are replaced regardless of age or wear which is another reason why reproduced parts overall work so much better. Whichever part within the part is new and this provides much longer life to the used part. Based on the lift truck parts that are being redone, the cleaning process and the complete remanufacturing process would vary.
The engines are cleaned after a complete disassembly. Various engine parts such as pistons, spark plugs, rings, valve springs, filters, and valves can be replaced during the process of remanufacturing. The engines are hot tested after reassembly to ensure that there are no oil pressure problems, no leaks, noises or any vacuum.
Transmissions are another thing that is oven cleaned after being disassembled. The transmission is then pressure washed. A comprehensive inspection is done to check for any cracks. Bearings, bushings and seals are all replaced. Normally, the replacement parts utilized on transmission components meet OEM specifications.
A few forklift parts like the water pump, torque converters, the alternator, steer axles and the starter could be quite serviceable after worn parts are replaced. The electronic control in the electric lift truck is maintained by the control card. This card could also be reproduced with replacing all aged and worn out parts. Unlike various forklift components the control card could only have the worn and aged parts replaced.
Remanufactured parts are meticulously checked upon reassembly to ensure they are in top condition prior to being sold. It is important when obtaining remanufactured components to be sure they have undergone the proper testing and inspection procedures. On certain larger parts like transmissions, steer axles and engines, OEM specification replacement parts should be used.
The forklift dealer can guarantee that the components they have remanufactured meet the OEM specifications. This would likewise guarantee the parts meet industry standards. A lot of details go into remanufacturing used parts. This attention to detail provides more serviceability out of remanufactured components compared to the components that were just rebuilt.
Click to Download the pdf