Fork Mounted Work Platform - There are specific requirements outlining lift truck safety standards and the work platform has to be made by the maker to conform. A custom-made designed work platform can be designed by a licensed engineer as long as it likewise satisfies the design criteria according to the applicable forklift safety standard. These customized designed platforms need to be certified by a professional engineer to maintain they have in fact been made in accordance with the engineers design and have followed all requirements. The work platform needs to be legibly marked to show the label of the certifying engineer or the manufacturer.
Particular information is needed to be marked on the equipment. For instance, if the work platform is custom-made made, a unique code or identification number linking the design and certification documentation from the engineer must be visible. When the platform is a manufactured design, the serial or part number to be able to allow the design of the work platform need to be marked in able to be associated to the manufacturer's documentation. The weight of the work platform while empty, in addition to the safety requirements which the work platform was built to meet is amongst other vital markings.
The rated load, or also called the utmost combined weight of the devices, individuals and materials allowable on the work platform have to be legibly marked on the work platform. Noting the least rated capacity of the forklift that is needed to be able to safely handle the work platform can be determined by specifying the minimum wheel track and forklift capacity or by the make and model of the forklift which could be utilized along with the platform. The method for fastening the work platform to the fork carriage or the forks must likewise be specified by a licensed engineer or the producer.
Other safety requirements are there to be able to ensure the floor of the work platform has an anti-slip surface. This needs to be placed no farther than 8 inches more than the normal load supporting area of the forks. There must be a way given so as to prevent the work platform and carriage from pivoting and revolving.
Just trained operators are authorized to operate or work these equipment for hoisting workers in the work platform. Both the work platform and lift truck ought to be in compliance with OHSR and in good working condition previous to the use of the system to raise workers. All manufacturer or designer directions which pertain to safe operation of the work platform must likewise be accessible in the workplace. If the carriage of the forklift is capable of pivoting or turning, these functions have to be disabled to maintain safety. The work platform must be locked to the forks or to the fork carriage in the specified way provided by the work platform producer or a licensed engineer.
Various safety ensuring requirements state that the weight of the work platform combined with the maximum rated load for the work platform should not exceed one third of the rated capacity of a rough terrain lift truck or one half the rated capability of a high lift truck for the configuration and reach being utilized. A trial lift is required to be performed at each job site instantly before lifting personnel in the work platform. This process ensures the forklift and be positioned and maintained on a proper supporting surface and likewise in order to ensure there is enough reach to place the work platform to allow the task to be done. The trial process likewise checks that the mast is vertical or that the boom can travel vertically.
A trial lift must be done at every task location at once before raising employees in the work platform to guarantee the lift truck can be situated on an appropriate supporting surface, that there is enough reach to place the work platform to allow the job to be done, and that the mast is vertical or the boom travels vertically. Using the tilt function for the mast can be utilized in order to assist with final positioning at the job site and the mast needs to travel in a vertical plane. The trial lift determines that enough clearance could be maintained between the elevating mechanism of the forklift and the work platform. Clearance is even checked according to storage racks, overhead obstructions, scaffolding, as well as whatever surrounding structures, as well from hazards such as energized device and live electrical wire.
Systems of communication should be implemented between the lift truck operator and the work platform occupants to be able to safely and efficiently manage operations of the work platform. If there are many occupants on the work platform, one individual should be selected to be the primary person accountable to signal the lift truck driver with work platform motion requests. A system of hand and arm signals must be established as an alternative means of communication in case the primary electronic or voice means becomes disabled during work platform operations.
In accordance with safety measures, employees should not be transported in the work platform between different job sites. The work platform needs to be lowered so that employees can exit the platform. If the work platform does not have guardrail or enough protection on all sides, each and every occupant must wear an appropriate fall protection system connected to a selected anchor spot on the work platform. Staff need to carry out functions from the platform surface. It is strictly prohibited they do not stand on the guardrails or make use of any mechanism in order to add to the working height on the work platform.
Finally, the operator of the lift truck must remain within 10 feet or 3 metres of the controls and maintain contact visually with the lift truck and work platform. When occupied by staff, the operator should abide by above requirements and remain in full contact with the occupants of the work platform. These guidelines aid to maintain workplace safety for everybody.
Click to Download the pdf